HDI - making too hard easy
  • Home
  • About HDI
  • Solutions
  • Products
    • Matrix Fan Coil Systems
    • Delta Controls
    • LED Lighting
  • Contact HDI

System Managers

Picture
Back to Products                           Back to Controls                             Back to Lighting

Lighting System Manager DLS

Picture
The DLS Lighting Cabinets are factory pre-wired and tested to reduce field installation costs. The flexible cabinet sizes can be used in installations ranging from smaller distributed lighting control solutions to large central installations.

The flexible design of these lighting cabinets allow the
field installation to determine how the interior and doors are mounted to the enclosure. Low voltage wires can be accessed from either the top or bottom, and the doors can be installed for left or right opening





Features:
      
+ 12, 36, and 72 relay cabinet sizes
+ Configurable barriers to allow from 1 to maximum
cabinet relay capacity
+ Enclosure separate from interior allows wires to be
pulled before the relays and controller are installed
+ Doors provide access to the low voltage area while
providing a barrier to the high voltage area
+ Large wire way allow for the running of high voltage
wires from one side to the other on the 36 or 72
relay size cabinets
+ Controller mounted on raised rails to conceal low
voltage switch wiring
+ 12 relay size cabinet can easily be flush mounted
between standard 16 inch studs
+ Optional high voltage area barriers allow for multiple
line voltages in each cabinet

Back to Lighting                                 Back to Controls                                   Back to Top

System Manager / Controller eBCON

Picture
The enteliBUSTM Controller (eBCON) is a fully programmable native BACnet® Building Controller. The Controller supports multiple communications methods including, as standard, BACnet/IP, BACnet® over Ethernet, BACnet MS/TP and Delta LINKnet.

The Controller integrates the functions of the enteliBUS Manager and the enteliBUS Expander into a single compact module. This single module contains the primary CPU, memory storage, external communication ports, and direct I/O control for up to 4 enteliBUS I/O Modules.

The Controller comes bundled with a controller Backplane that holds up to 4 I/O Modules. A connector on the Backplane allows for further I/O expansion. Up to 8 Backplanes (and associated I/O Modules) can be controlled from a single enteliBUS Controller module.



Back to Lighting                              Back to Controls                                   Back to Top
Please contact the Webmaster@HDI-Corp.com if you discover problems with the website