HDI - making too hard easy
  • Home
  • About HDI
  • Solutions
  • Products
    • Matrix Fan Coil Systems
    • Delta Controls
    • LED Lighting
  • Contact HDI

Application Controllers

Picture
Back to Products                           Back to Controls                             Back to HVAC

HVAC Application Controller (DAC)

Picture
The DAC range of controllers are fully programmable, Native BACnet™ Advanced Application Controllers that communicate on an RS-485 LAN using the BACnet MS/TP protocol.

The DAC is designed for a wide-range of applications that have medium local I/O requirements. It also supports BACstats and other Delta LINKnet devices.

They come in a variety of I/O configurations as set out below.
Picture
Features:
    Native BACnet firmware
    BACnet MS/TP communications
    Supports 10 BACstat network sensors on LINKnet for room sensing and control 
    Delta Field Modules on LINKnet for I/O expansion
    Actuator power terminal (24VAC) for each analog output
    Actuator power terminals can be powered from an auxiliary transformer
    Easy to mount housing
    Fully programmable in GCL+
    Application database can be flash loaded over the network
    Controller firmware can be flash loaded over the network
    Supports Modbus capability via flash loading in the field
    Supports flash loading Modbus upgrades via hardware key
    Derived Network Addressing (DNA) for simple integration into a standard
         network architecture
Back to HVAC                                  Back to Controls                             Back to Top

HVAC Application Controller (DVC)

Picture
DVC Controllers are fully programmable, Native BACnet™ Advanced Application Controllers designed for VAV applications and support the Delta BACstat and LINKnet I/O.

The damper actuator assembly is available with or without position feedback. Additional inputs and outputs can be configured as required.

Back to HVAC                                 Back to Controls                                 Back to Top

HVAC Application Controller (DFC)

Picture
DFC Controllers are fully programmable, Native BACnet™ Advanced Application Controllers designed for Fan Coil control. They communicate on an RS-485 LAN using the BACnet MS/TP protocol.

Direct 240 VAC line voltage terminal connections are provided for 1, 2 or 3 speed fans.

Room temperature can be a standard 10KΩ sensor or BACstat II, connected via a secondary LINKnet network and a 24 VAC power out connection.

Back to HVAC                                 Back to Controls                                 Back to Top
Please contact the Webmaster@HDI-Corp.com if you discover problems with the website