HDI - making too hard easy
  • Home
  • About HDI
  • Solutions
  • Products
    • Matrix Fan Coil Systems
    • Delta Controls
    • LED Lighting
  • Contact HDI

Field Modules

Picture
Back to Products                           Back to Controls                             Back to HVAC
Picture
Picture
The DFM-ZBEE is a wireless interface device capable of transmitting and receiving wireless communications from enteliMESH temperature and humidity sensors.

The DNT range is an intelligent room thermostat with a custom 3-value, 96 segment, LCD display. The DNT can communicate on Delta’s LINKnet network or directly on a BACnet MS/TP network. It can display a wide-range of digital or analog values including setpoints, temperature, airflow, heating and cooling status, fan speed, valve and damper position, and more.

When connected on a BACnet MS/TP network, the DNT functions as an independent BACnet thermostat. When connected to a Controller, on a LINKnet network, the DNT provides a programmable remote sensor and expanded I/O capabilities.

The DNS products are networked temperature and humidity sensors without I/O built into them.

The DFM-ZBEE is a wireless interface device capable of transmitting and receiving
wireless communications from enteliMESH temperature and humidity sensors.
Picture
Back to HVAC                                  Back to Controls                             Back to Top


enteli
BUS™ eBM-xxx Field Modules

The enteliBUS Control System is made up of multiple modular components that you select to meet the exact needs of a wide range of HVAC and Access control applications.
The enteliBUS I/O Modules provide the field I/O interface for the enteliBUS Control System. With I/O Modules supporting all common control types this allows the controller I/O mix to be easily and efficiently tailored to fit any application.

enteliBUS™ eBM-400R4-H

Picture
I/O Expansion Module with 4 universal inputs and 4 relay outputs with optional monitored overrides. Auto detecting and hot swappable I/O Modules are selected to create the exact I/O combination needed for a given application. Should the application require the system to expand in the future, I/O expansion is easy to add.

Auto detecting & hot swappable

24V (AC or DC) digital inputs. Module supplies input power simplifying wiring to dry contacts. Input power is fused and monitored

Tri color LED status indication of each input state, with jumper selectable behavior for input LED action (NO/NC) and color (red, green or yellow)

Relay outputs for switching 24V AC or DC loads. Internal power jumper option simplifies field wiring. Internal power is fused and monitored

3 position (HAO) monitored output override switches (optional).
Tri color LED status indication of each output state
Small footprint, DIN rail mountable
Modular design provides flexibility, ease of service, and reduced cost for future upgrades/expansion

Back to HVAC                                  Back to Controls                             Back to Top

enteliBUS™ eBM-404-H

Picture
The 404-H EntiliBus Field Module has 4 Universal Inputs and 4 Triac Outputs with Hand Off Auto switchesAuto detecting and hot swappable I/O

Modules are selected to create the exact I/O combination needed for a given application.

Should the application require the system to expand in the future, I/O expansion is easy
to add.
Auto detecting & hot swappable
Universal inputs (jumper configurable)
0-100% LED status indication of each input state.
3 position (HAO) monitored output override switches (optional)
Tri color LED status indication of each output state
Small footprint, DIN rail mountable

Modular design provides flexibility, ease of service, and reduced cost for future upgrades/expansion

Back to HVAC                                  Back to Controls                             Back to Top

enteliBUS™ eBM-440-M

Picture
 I/O Expansion Module with 4 universal inputs and 4 universal outputs with optional monitored overrides. Auto detecting and hot swappable I/O Modules are selected to create the exact I/O combination needed for a given application.

Should the application require the system to expand in the future, I/O expansion is easy to add.

Auto detecting & hot swappable
Universal inputs (jumper configurable)
0-100% LED status indication of each input state.
0-100% adjustable monitored output overrides (optional)
Tri color LED status indication of each output state.
Small footprint, DIN rail mountable

Modular design provides flexibility, ease of service, and reduced cost for future upgrades/expansion

Back to HVAC                                  Back to Controls                             Back to Top

enteliBUS™ eBM-800

Picture
I/O Module with 8 digital inputs. Auto detecting and hot swappable I/O Modules are selected to create the exact I/O combination needed for a given application. Should the application require the system to expand in the future, I/O expansion is easy to add.

Auto detecting & hot swappable

24V (AC or DC) digital inputs. Module supplies input power simplifying wiring to dry contacts. Input power is fused and monitored

Tri color LED status indication of each input state, with jumper selectable behavior for input LED action (NO/NC) and color (red, green or yellow)

Small footprint, DIN rail mountable

Modular design provides flexibility, ease of service, and reduced cost for future upgrades/expansion

Back to HVAC                                  Back to Controls                             Back to Top
Please contact the Webmaster@HDI-Corp.com if you discover problems with the website